Carija 43 Aluminum Sloop
- Boat REF# · 73650
- LOA · 13.11m
- Year · 1973
- Construction · Aluminium
- Underwater profile · Fin
- Berths · 7
- Engine · 1 x Diesel 50hp, Kubota / Beta Marine (2006)
- Lying · Seattle
This boat is off the market but here are some boats that are still For Sale
Extra Details
| Builder | Carija Yachtbuilders |
|---|---|
| Lying | Seattle |
| Fuel capacity | 250.0 ltr Total - 1 Tanks |
| Water capacity | 340.9 ltr Total - 1 Tanks |
| Holding tank capacity | 27.3 ltr Total - 1 Tanks |
| Last survey | 01/08/2002 |
Mechanical
| Engine | 1 x Diesel 50hp |
|---|---|
| Engine make and model | Kubota / Beta Marine (2006) |
| Engine Hours | Not Recorded |
| Engine Cooled | Indirect |
| Steering | Wheel |
| Drive | Shaft |
| Prop(s) | 2-blade folding |
| Fuel consumption (approx) | 3.0 ltr /hour At Cruising Speed |
| Cruising speed (approx) | 7 knots |
| Max speed (approx) | 8 knots |
Tech Elec regulator, battery amp-hour meter. 1200 watt inverter.
New Kubota / Beta Marine engine with less than 50 operating hours. New Drive shaft. Pre-lube system installed at the same time.
Dimensions
| LOA | 13.11m |
|---|---|
| LWL | 11.58m |
| Beam | 3.66m |
| Draft Max | 2.13m |
| Displacement | 14,513kg |
| Headroom | 1.98m |
| Storage | On marina |
Rig
Sloop rigged Aluminium spars (1977) with stainless steel standing rigging (1977)
Sails
| Mainsail | North - Slab (2007) |
|---|---|
| Headsail | - Furling () |
| Other sails | Spinnaker () |
| Spinnaker gear |
|---|
Standing rigging is 3/8" stainless steel. Very sturdy aluminum mast.
Barient #35 primary winches; Barient #28 secondaries.
New North tri-radial full batten mainsail in 2007 -- raised only four times. North 135% furling genoa -- good condition. Spinnaker sail and gear.
Electrical Systems
12 volt battery, 4 batteries charged by: engine, shore power
Construction
| Construction | Aluminium |
|---|---|
| Underwater profile | Fin |
| Finish | Paint finish |
Constructed of 5086 alloy aluminum. The hull is a round-bilged design with a heavy large fin keel. The overall displacement of the vessel is 32,000 lbs, with 12,000 lbs in the keel. Sturdy construction -- the keel will fully support the entire vessel. Skeg-hung rudder.
Built by Carija Yachtbuilders of Merillville, Indiana for long distance crewed racing on the Great Lakes.
Well-insulated with styrofoam between all frames. Hull and superstructure are designed to prevent water intrusion. This boat is exceptionally dry!
The boat was hauled April 2010, her bottom sanded, and two coats of bottom paint applied.
Accommodation
| Total # of berths | 7 |
|---|---|
| No. of double berths | 2 |
| No. of single berths | 5 |
| Cabin(s) | 3 |
| Handbasin | 1 |
| Shower | 1 |
| Heads | 1 heads (Manual) |
Designed to accommodate a large crew! The forepeak (currently used for storage) includes two single berths. The saloon dinette converts to a double berth. To starboard is a comfortable settee that includes two single berths. The aft cabin includes a single berth to starboard and a large double berth to port. The head is forward, between the saloon and the forepeak, and includes a complete shower curtain enclosure and a teak shower grating under a removable carpet section.
Cabin heat is provided by a Dickinson diesel-fired stove with circulating fan. Hot water is from engine heat and an electric hot water heater when on shore power.
Plenty of interior light from many portlights and decklights.
3 burner gas cooker/stove
Accommodation
| Cooker/stove | |
|---|---|
| Oven | |
| Sink | |
| Refrigerator | |
| Freezer | |
| Carpet | |
| Cabin heating | |
| Pressurised water system | |
| Hot water system |
Designed to accommodate a large crew! The forepeak (currently used for storage) includes two single berths. The saloon dinette converts to a double berth. To starboard is a comfortable settee that includes two single berths. The aft cabin includes a single berth to starboard and a large double berth to port. The head is forward, between the saloon and the forepeak, and includes a complete shower curtain enclosure and a teak shower grating under a removable carpet section.
Cabin heat is provided by a Dickinson diesel-fired stove with circulating fan. Hot water is from engine heat and an electric hot water heater when on shore power.
Plenty of interior light from many portlights and decklights.
3 burner gas cooker/stove
Deck Gear
| Warps | |
|---|---|
| Fenders | |
| Instrument Covers | |
| Bimini |
3 halyard winches
4 sheet winches
Manual windlass
1 anchors
(CQR 60#)
60.96m of chain
Metzler dinghy (1982)
(Inflatable)
Nav Equipment
| Speed | |
|---|---|
| Log | |
| Wind | |
| VHF | |
| Stereo | |
| Navigation lights | |
| TV | |
| Video | |
| Fish Finder | |
| Echo sounder |
Apelco XCD 241 Depth/Fishfinder; Standard Horizon Quantum VHF; Furuno GP-32 GPS/Plotter.
Safety Equipment
| Life jackets | |
|---|---|
| Life buoys |
2 bilge pumps (1 manual / 1 Electric)
Broker's Comments
This sturdy aluminum sloop was built to compete in the prestigious 333 mile Chicago-Mackinac race -- the world's longest freshwater race -- and was constructed by a yachtbuilder specializing in aluminum. She features accommodations for a large crew, a very stout rig, a new mainsail, and a new diesel engine.
The seller has owned and attentively cared for the boat for 28 years.
The interior is roomy and well-lit. The owner reports that she is a very dry and warm boat, well-prepared for comfortable cruising in all weather. He purchased her for her offshore capabilities, and it's easy to see that this boat could allow her new owners to voyage anywhere safely. With a slender profile and a large, heavy fin keel she's a fast, stiff vessel that sails well to wind. This boat should be considered by anyone looking to go offshore with the integrity and strength of a real metal ship under sail.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.